0AM computer board installation precautions

Important reminder

0AM computer board installation when a professional technical work, a little pay attention to the easy to cause failure, resulting in the consequences of the former work, Bai Ke intelligent friends have specifically summarized the installation of 0AM computer board several notes, here to share with you .

0AM computer board installation precautions

1. Please install according to the torque indicated in the maintenance manual;

2. Please confirm that the gearbox hardware has been repaired before replacing this product;

3. Please confirm the internal cleanliness of the gearbox, especially the gear head, and confirm that the cooler has been cleaned;

4. When replacing the transmission oil, please confirm whether the oil is the original standard transmission oil;

5. When installing the gearbox computer separately, please make sure that the valve body pin is not offset! The contact point of the computer board should be accurately connected to the valve body to avoid short circuit caused by violent installation, causing the solenoid valve of the computer board to malfunction;

6. When installing the electromechanical unit, please ensure that the valve body oil is added;

7. After installation, please correctly program according to the corresponding model and guide and then test the car.